@Roger G.

Yes, since I’m working from home at the moment, unfortunately I can’t always restart 😞 This morning I had the message in the router again and now it works again without me doing anything. As soon as I get the error message back, I’ll post it here.

But I think it has something to do with the switch… unfortunately it’s the only way I can get an optimal position in the house.

@xtreme

If you want to find out whether the switch is actually causing the problem, you have to temporarily lay a “flying” Gigabit Ethernet cable between the booster and the Internet box to narrow it down and thus bypass the switch.

hed

@wolewo @xtreme

Since I connected the 5G booster directly to LAN, there has been no problem anymore. I can’t say 100% whether it’s really because of that, as there were problems with that in the past.

Previously I used the WLAN-Box 2 as a switch which was directly connected to the IB3 as an access point via LAN.

Which switch do you have? If you don’t have a cascade of switches, I don’t see a problem. Unless YOU have any other problems with the network at home.

I don’t have any problems downstairs, I’ve had 5G radio continuously for several days… but also a little less power. But no one notices.

Hmmm, I also had the problem with the switch on the WLAN box, but it was because of the cascade. I think it’s worth pulling a flying cable to the WLAN box and connecting the booster there.

So I’ll get in touch again.

I don’t believe the statement that the poster should be added if you need more speed.

I’m currently downloading various programs and the TV 2pcs. also run. The download is extremely slow and 5G is not connected. (not all day).

I wanted to upload the new website, but it’s also very slow.

The webcam stream is also jerky.

So what’s the problem now?

With me or on the poster that shows me with the green lamp that everything should be ok.

Greeting

Daniel

@wolewo

If 5G is not available, you should also get the target value of the subscription “M” with 4G, which is at least the case for me if 5G fails.

This is not acceptable for the L subscription…

---

wolewo wrote:

---

Is this the same subscription, the same Anschluss? What do the three values ​​look like without bonding? So I admire your commitment to collecting bonding experiences here…

kaetho

yes it is the same Anschluss. Bosster dismantled, serviced a little and then measured.

I downloaded Winn 11 ISO with the booster (wanted to) and stopped after 30 minutes.

This morning I found another error.

5G suddenly works again even though nothing is running on my network.

When 5G is running, my Swisscom DynDNS no longer works.

I’m on the internet with a 178 IP, but in the internet box it shows me the 85th IP.

See pictures.

If I then turn off the booster, DynDNS works again and I can access my cams and Nextcloud.

wolewo

VPN works for me.

What I did deactivated the 5G booster support on the base station for the ARLO Camera.

I always had strange interruptions when I wanted to access the mobile network from outside.

@WalterB Good idea, but it’s not that easy for me. I have a Unifi UDMPro with DMZ behind the IB.

You currently have the booster turned off and then the DynDNS service runs wonderfully.

Must be able to rely on it since I have a lot of users for Nextcloud.

@wolewo

I have my own private and club homepage hosted by “Hoststar” and I use OneDrive for the image archive where visitors to the homepage can look at the club pictures.

For data, I use a QNAP NAS TC-251+ where users can retrieve and store data.

There is also an app for smartphones and of course for computers with registration via the WEB to access the data.

I have a lot of devices running DynDNS. Webcam, weather stations, Nextcloud lightning detection, various services from the Syno.

Maybe @Roger G should take a look at what’s going on. There’s a worm in my head somewhere.

Hello everyone

I’ve had the booster for a few days and also found a good place, but despite the config being finished, it still shows me the following: Receiver No Internet. Who has to do what?

@SwisscomOpfer

In this case, I recommend calling the SC helpdesk (Tel. 0800 800 800)

hed

@Ralphy

If it is not present in the Kundencenter, the registration is missing.

WalterB

@Roger G

Since the last storm, my 5G reception has gotten worse from 95dBm to 100dBm, and there are only two graduation lines left, whereas there used to be three graduation lines.

Where can you report this to check whether the storm has changed anything?