Yes, of course. As mentioned, I played the game several times. Tomorrow I will restart the IB2 and reconnect the RPT again.

Greeting

PeterM1

Additional info:

The problem with the “blocked” RPT not only occurs during the WLAN times stored in the child protection function, but also when the daily limit (here 1.5 hours) has been used up. Specifically this means:

As soon as our youngest exceeds the limit, the RPT blocks access to the Internet from all other devices. This is despite the fact that (as already mentioned) the connections and LEDs are OK.

Greeting

PeterM1

…me again:smileyindifferent:

Can’t anyone tell me why I don’t see the RPT in the IB2 device list, but it is displayed in the WLAN diagnosis in the 5GHz network? The IP address is also correct, I can access the RPT via it.

In previous configurations with the IB2 and previously the Centro Grande, the RPT was visible. Ultimately called a “wifi bridge”, whoever came up with that name…

Thanks for your feedback.

Best regards

PeterM1

P.S. Can’t you attach PDF or JPG files here?

WalterB

Hello WalterB

Thanks for the tip about the photo file… anyone who can read is clearly at an advantage:smileyvery-happy:

I have already reset the repeater several times, switched all devices off/on (disconnected from the mains, as it says in the first post) and then integrated them back into the home network one after the other. I had to do this because I wanted to describe the imaginative names of the various devices in a clearly recognizable way.

Thanks for your help and best regards

PeterM1

Here is the current device list of the IB2

Here is the RPT from an archived device list

Here is the current WLAN diagnosis in the IB2

WalterB

“I saw that you have a lot of WLAN kit in use, try switching them all off and then try again to connect the repeater to the Internet box.”

I’ve done this several times, without success.

“… assign the repeater a fixed IP address outside the range of IP addresses of the Internet box, e.g. 192.168.1.199”

I wanted to try that, but how exactly do I do that if the RPT doesn’t appear anywhere? Do I then change the IP in the RPT itself? Attached is a screenshot of the RPT.

Greeting

PeterM1

WalterB

Does it make a difference whether I access the RPT via the browser/IP address or via a LAN cable via PC?

• When I’m in the RPT menu…

…do I change the IP to e.g. 199 and leave “Automatic” activated, or do I have to change it to “Static”?

• I don’t have to make any changes to the IB2? After changing the RPT IP, the IB2 has to be restarted, that’s clear to me. But how does the IB2 know that outside its rank ( up to 161) there is still a device connected to the network?

I’m starting to feel a bit confused….:smileyfrustrated:

Thank you for your patience…

Greeting

PeterM1

Hello MCU

It’s been a long time, but I disposed of all the AirTies professionally and further Two new ones from Swisscom WLAN boxes purchased. Their range is significantly better than with the repeater stuff. Although all Swisscom employees assured me that it “should” work with the repeater. This is how you boost sales

Greeting

PeterM1