I’ve been using this sensor at the link below for some time, the settings still take a little getting used to, otherwise it works well as a motion sensor at night
Turn light on and off.
https://mystrom.ch/de/wifi-motion-sensor/
Installationen, Netzwerk, Internet, Computertechnik, OS Windows, Apple und Linux.
Some firmware is installed every 3-4 months and the nice thing about it is that you can see this very well with the original app.
N.b. It may be that if the LED stays red for a long time after an update, you have to briefly unplug and plug in the MyStrom Switch so that the LED lights up white again (very rare).
Installationen, Netzwerk, Internet, Computertechnik, OS Windows, Apple und Linux.
If you have problems with the MyStrom Switch, the homepage at the link below is a good place to start.
https://mystrom.ch/de/wifi-switch/
and
https://mystrom.ch/de/support/wifi-switch/
I use two MyStrom switches for Christmas lighting with electronic time setting. I had to replace one of the first older MyStrom switches because the switching contact got stuck and I could no longer turn it off with my finger at the top of the switch symbol.
Installationen, Netzwerk, Internet, Computertechnik, OS Windows, Apple und Linux.
@skullking P= U*I
the power is 6 watts divided by 1.5 volts = 4A!!! if the information is correct. Actually a USB Anschluss has 5V.~
Sorry I read it wrong 2× 1.5V batteries makes 3V.
if I recalculate that with 5V that makes 1.2 A. Depends on what kind of power supply adapter you have, can it really deliver 2 A mpere?
The app worked very well for a long time and now there is a temporary problem on Vimeo’s part. In your opinion, should Swisscom now remove the app and reactivate it once the Vimeo problem has been resolved?
With the many TV channels and apps available via the SC box, there are always some with temporary disruptions. This is in the nature of things and cannot be prevented with reasonable effort.
I would reset the TV-Box so that the current OS is installed cleanly.
Not a software reset but with a bent paper clip at the bottom of the box.
Then restart everything (router and TV-Box one after the other).
With the current promo about fiber for Vivo M and L it should actually be over 900Mbps…
#user63
@skullking wrote:
I’ve already checked everything: cabling, reset, box turned off completely, etc. It’s all original Swisscom accessories (HDMI cable, etc.)
At this point, the same questions as always:
-How is the TV-Box connected to the router? (LAN cable, connection kit, anything else)
-Is there something else in between? (Switch, Booster, AP, anything else) If yes, brand/model name
….keep on rockin' 🤘🏼🤘🏼🤘🏼
@skullking wrote:
OK thanks for the link - all three are Samsung MAC addresses…but I only have one Samsung Smart. It is connected to the Synology via a network cable.
How do I get rid of the two other IP addresses?
Greetings, Felix
What happens if you deactivate IPv6!
Installationen, Netzwerk, Internet, Computertechnik, OS Windows, Apple und Linux.
@skullking wrote:
When I switch everything back to the way it should be, i.e. with the Switel base station - it still whistles.
Did you log it out of the Internet box and log it back into the Switel base?
