Connected this evening, installed a backup, everything is good! 😉
Auuuuuusser: It was upgraded from a 40′ profile to a 50′. Well meant and I would actually be happy about it… but since the signal-to-noise ratio has fallen to 8.3db in the downtime, I’m afraid I’ll have problems watching TV again 😞
I’ll test it and if necessary report it to support and ask them to switch me down again 😞
@xtreme wrote:
Connected this evening, installed a backup, everything is good! 😉
Auuuuuusser: It was upgraded from a 40′ profile to a 50′. Well meant and I would actually be happy about it… but since the signal-to-noise ratio has fallen to 8.3db in the downtime, I’m afraid I’ll have problems watching TV again 😞
I’ll test it and if necessary report it to support and ask them to switch me down again 😞
For me the values are even lower and so far it has worked with two UHD TV boxes without any problems!
Installationen, Netzwerk, Internet, Computertechnik, OS Windows, Apple und Linux.
Hmmm… my values are similar to @WalterB, but the sync speed is underground for me:smileysad:. Would it perhaps help to measure the line again?
LG Uwe
WOMOBLOG.CH - tips about motorhomes
Whow, ein Megabit-Spike 
gur_helios wrote:
Hmmm… my values are similar to WalterB, but the sync speed is underground for me:smileysad:. Would it perhaps help to measure the line again?
The performance should adjust automatically as normal, it is important not to turn off the Internet box at the back at the power switch, just leave it on for a few weeks.
Installationen, Netzwerk, Internet, Computertechnik, OS Windows, Apple und Linux.
@WalterB wrote:
The performance should adjust automatically as normal, it is important not to turn off the Internet box at the back at the power switch, just leave it switched on for a few weeks.
Hello Walter,
the values haven’t changed in ages. They were the same when I was still using the IB+ and that was a while ago.
Yes, I’m aware of the switch-off thing.
Could you initiate the measuring process? It’s possible that I’ll get a better sync then. It’s not really fun with these values.
LG Uwe
WOMOBLOG.CH - tips about motorhomes
gur_helios wrote:
Hello Walter,
the values haven’t changed in ages. They were the same when I was still using the IB+ and that was a while ago.
Yes, I’m aware of the switch-off thing.
Could you initiate the measuring process? It’s possible that I’ll get a better sync then. It’s not really fun with these values.
LG Uwe
What is shown with the speed test at the link below, important to measure via LAN?
Installationen, Netzwerk, Internet, Computertechnik, OS Windows, Apple und Linux.
The following (always measure via LAN). The values match the profile quite well.
Still had to remove my external IP. I had overlooked it before.
LG Uwe
WOMOBLOG.CH - tips about motorhomes
@gur_helios wrote:
the values haven’t changed in ages. They were the same when I was still using the IB+ and that was a while ago.
Yes, I’m aware of the switch-off thing.
Could you initiate the measuring process? It’s possible that I’ll get a better sync then. It’s not really fun with these values.
LG Uwe
Have you ever contacted support and asked about the big difference?
I can’t do anything about your Anschluss myself because I’m a customer like you.
It is important to mention that the problem already existed with the IB+ and now also with the IB2.
So in my opinion it can’t be the Internet box.
Installationen, Netzwerk, Internet, Computertechnik, OS Windows, Apple und Linux.
WalterB wrote:
Have you ever contacted support and asked about the big difference?
I can’t do anything about your Anschluss myself because I’m a customer like you.
It is important to mention that the problem already existed with the IB+ and now also with the IB2.
So in my opinion it can’t be the Internet box.
I haven’t contacted support yet. I will make.
Thank you for the help.
LG Uwe
WOMOBLOG.CH - tips about motorhomes
At best, @Anonymous knows more about the FW here.
@micromag84 wrote:
VPN definitely no longer works as of today. Yesterday I still had the old FW (delivery version).
But now I found out why. My xy internet-box.ch dyndns address no longer points to my current IP address! How come?
I have been using the IB2 since yesterday evening. Commissioning went smoothly.
The Gigast SL450HX Dect handset was also easy to pair. IP landline telephony worked without any problems right from the start.
I have a Vivo L subscription, which currently has 1 Gbit/s speed as a promotion (instead of 300 Mbit/s normally).
With all iOS devices (iPhone 7, iPad Air 2, iPad Mini 4) I get an average download speed of around 350 Mbit/s on the 5 GHz WiFi throughout the entire apartment (around 120 square meters, one floor, IB 2 placed centrally in the living room on a lowboard).
I am particularly happy with the WiFi performance. Since I only access the Internet via WiFi, I will now be able to fully utilize the normal 300 Vivo L Mbit/s via WiFi. Higher download rates via WiFi are unlikely to be realistic anyway…
@WalterB wrote:
Have you ever contacted support and asked about the big difference?
I can’t do anything about your Anschluss myself because I’m a customer like you.
It is important to mention that the problem already existed with the IB+ and now also with the IB2.
So in my opinion it can’t be the Internet box.
Short feedback.
I contacted support. However, I can’t do anything about the speed. And there are no plans to expand the network in the near future.:smileysad:
LG Uwe
WOMOBLOG.CH - tips about motorhomes
