Received the box. Unfortunately the config was not adopted or was an outdated one from 2015.

VPN stopped working yesterday but today from work…

---

@micromag84 wrote:

Received the box. Unfortunately the config was not adopted or was an outdated one from 2015.

VPN stopped working yesterday but today from work…

---

Did you not create a backup of the Internet box before and restore it to the new Internet-Box 2?

To those who have already received the new box. Is the WiFi much better or what experiences have you had so far? For me it’s all about getting these 😉

In relation to the IB+, the WiFi goes further for me with the IB2; Seen like that, yes, it’s better.

Ordered IB2 yesterday at noon… already delivered at noon today.:smileylol:

Setup took just under an hour, with all cables and external hard drive reconnected. Previously saved the configuration of the IB Standard locally on my Mac, after the installation the IB2 was restored with the file.

- LAN and WLAN work perfectly

- VPN works fine

- Central storage via my external hard drive works perfectly on the iPhone 7+ with the Internet-Box app and with the FileBrowser or Readdle Documents and on the Mac too

- SONOS works perfectly with the external hard drive (central storage)

Completely satisfied so far…:smileyhappy:

Connected this evening, installed a backup, everything is good! 😉

Auuuuuusser: It was upgraded from a 40′ profile to a 50′. Well meant and I would actually be happy about it… but since the signal-to-noise ratio has fallen to 8.3db in the downtime, I’m afraid I’ll have problems watching TV again 😞

I’ll test it and if necessary report it to support and ask them to switch me down again 😞

---

@xtreme wrote:

Connected this evening, installed a backup, everything is good! 😉

Auuuuuusser: It was upgraded from a 40′ profile to a 50′. Well meant and I would actually be happy about it… but since the signal-to-noise ratio has fallen to 8.3db in the downtime, I’m afraid I’ll have problems watching TV again 😞

I’ll test it and if necessary report it to support and ask them to switch me down again 😞

---

For me the values ​​are even lower and so far it has worked with two UHD TV boxes without any problems!

Little tip. It was the same for me during the test phase. SNR was 8.5. The longer the IB2 ran, the better the values ​​became. Wait a few days.

stwin

Don’t worry, my IB2 has been running very stable for 3 months with “only” 7.2dB S/N distance…:smileyhappy:

Boobele

Hmmm… my values ​​are similar to @WalterB, but the sync speed is underground for me:smileysad:. Would it perhaps help to measure the line again?

LG Uwe

WOMOBLOG.CH - tips about motorhomes

Whow, ein Megabit-Spike

gur_helios wrote:

Hmmm… my values ​​are similar to WalterB, but the sync speed is underground for me:smileysad:. Would it perhaps help to measure the line again?

The performance should adjust automatically as normal, it is important not to turn off the Internet box at the back at the power switch, just leave it on for a few weeks.

---

@WalterB wrote:

The performance should adjust automatically as normal, it is important not to turn off the Internet box at the back at the power switch, just leave it switched on for a few weeks.

---

Hello Walter,

the values ​​haven’t changed in ages. They were the same when I was still using the IB+ and that was a while ago.

Yes, I’m aware of the switch-off thing.

Could you initiate the measuring process? It’s possible that I’ll get a better sync then. It’s not really fun with these values.

LG Uwe

WOMOBLOG.CH - tips about motorhomes

Then I’m reassured 😉 Does the IB2 have larger tolerances or how is it that the profile was suddenly raised by 10′ immediately after plugging it in?

---

gur_helios wrote:

Hello Walter,

the values ​​haven’t changed in ages. They were the same when I was still using the IB+ and that was a while ago.

Yes, I’m aware of the switch-off thing.

Could you initiate the measuring process? It’s possible that I’ll get a better sync then. It’s not really fun with these values.

LG Uwe

---

What is shown with the speed test at the link below, important to measure via LAN?

http://www.speedtest.net/de/

---

WalterB wrote:

What is shown with the speed test at the link below, important to measure via LAN?

http://www.speedtest.net/de/

---

The following (always measure via LAN). The values ​​match the profile quite well.

Still had to remove my external IP. I had overlooked it before.

LG Uwe

WOMOBLOG.CH - tips about motorhomes

VPN definitely no longer works as of today. Yesterday I still had the old FW (delivery version).

But now I found out why. My xy internet-box.ch dyndns address no longer points to my current IP address! How come?

---

@gur_helios wrote:

the values ​​haven’t changed in ages. They were the same when I was still using the IB+ and that was a while ago.

Yes, I’m aware of the switch-off thing.

Could you initiate the measuring process? It’s possible that I’ll get a better sync then. It’s not really fun with these values.

LG Uwe

---

Have you ever contacted support and asked about the big difference?

I can’t do anything about your Anschluss myself because I’m a customer like you.

It is important to mention that the problem already existed with the IB+ and now also with the IB2.

So in my opinion it can’t be the Internet box.

WalterB wrote:

Have you ever contacted support and asked about the big difference?

I can’t do anything about your Anschluss myself because I’m a customer like you.

It is important to mention that the problem already existed with the IB+ and now also with the IB2.

So in my opinion it can’t be the Internet box.

I haven’t contacted support yet. I will make.

Thank you for the help.

LG Uwe

WOMOBLOG.CH - tips about motorhomes