Dude33

Have you ever tried to access the Web GUI with a PC connected directly to the IB3 with a LAN cable?
If that doesn’t work either, what exactly is the error message?

Show original language (German)

Hobby-Nerd ohne wirtschaftliche Abhängigkeiten zur Swisscom

    5018 No, I’m using 192.168.180.1 the settings are all exactly the same as before… I have saved them in the Swisscom portal as a backup so that I can restore them as soon as the new firmware has an upgrade and I might run into a problem. That didn’t help either. I will probably have to call support again for a new box because the old firmware is still not available to install it again.

    Show original language (German)
    • 5018 has responded to this post.

        5018 Thanks for the input, but it can’t be because the special config sometimes works but is usually no longer accessible - all other devices work.

        Show original language (German)
        • 5018 has responded to this post.

            Dude33

            There is something wrong with your config in the new firmware.

            What happens if you just leave it on factory settings?

            Do you have a special VPN configuration, this could be a possible cause.

            Sometimes it is better with a completely new version.

            Re-enter and save the port rules.

            On my IP, only the 3rd digit of the IP address has changed.

            192.168.11.1…..

            I have no problems with this.

            I have several port forwardings on it.

            I have also activated Wireguard there, which is available with version R15.

            I have thrown the old VPN overboard.

            A new router won’t do you any good either, because it will get the update sooner or later.

            Greetings Lorenz

            Show original language (German)

              • 5018

              • Post no. 27

              Dude33

              The fact that you are not using 192.168.1.1 is new information. There may be an error with the change to R15 (where the basic operating system from Broadcom has been updated to a newer version). I’ll ask the router team.

              Show original language (German)

                  5018 What about your findings with the router team?

                  This post is in English
                  • 5018 has responded to this post.

                      Dude33 that’s not so fast. I told them to look at it. Then they will try to reproduce it. If that works, then you can narrow down the error. But since it is one of many things on the To-DO list and not a mass problem, it will certainly not be priority 1.

                      Show original language (German)
                          7 days later

                          user109 They just respond that is not possible ☹ to downgrade the firmware

                          This post is in English
                          changed by Dude33
                          • user109 has responded to this post.

                              Dude33 🤷 then you have to find out for yourself or let the developers find out why you have such massive problems with the new FW.

                              Unfortunately, I can’t help you there either, although I would like to. Various solutions have already been suggested to you, but if they don’t help, you’ll just have to wait for feedback from the developers.

                              Show original language (German)
                               changed by user109
                              • Dude33 has responded to this post.

                                  user109

                                  5018 by chance I got a work around, after reseting the IB3 I installed the last running backup config from my Swisscom backup mechanism and disconnectd all Lan connections before that and connected only by WLAN, still the UI did not responde properly by producing strange error messages (see attachements) but after refreshing the page many times the Login page at some point will be displayed and stressing on just some times. If Swisscom wants to know more about the behavior they can call me and I send an invoice for my work on it. I stopp here, I am not a Swisscom employee

                                  This post is in English