CNLab also needs adaptation on the network. For now all you can do is wait. And yes, you can of course later start a donation test using x devices in parallel and then add them up. But the guys in the lab did it and it really goes up to 8.8 MBit/s if you use various LAN and WLAN devices in parallel.
I know that I can’t receive a faster connection on my devices and that I don’t need a faster connection at the moment, but I would still like to know whether something has changed and whether my connection from the router to Swisscom is now well over 1Gbit/s.
I just think it would be cool if you understood what I mean.
Thank you very much for the many answers!
We are currently working on expanding the Internet Box Speedtest to 10Gbit/s. This will happen in the next few weeks.
This will also be the only way to test the 10Gbit/s. As long as you have a subscription with the appropriate service speed, of course.
It should also be mentioned that XGS-PON has a relatively large overhead. So you will measure approx. 8.2 / 8.0 GBit/s.
As already explained, you will get a maximum of 2.5Gbit/s from the LAN. But you need the appropriate equipment.
Theoretically, it is already possible to carry out tests across multiple ports using iperf3 or other measurement tools. But this requires a corresponding server in the network.
In the laboratory, of course, we did this with the Internet-Box 3. This is to show that the IB3 can also utilize the speed of the new fiber optic technology aggregated across all ports (LAN and WLAN).
Greeting,
MichelB
Is the connection type name on the screenshot from @ElectricBoi incorrect or deliberately in British English?
Fiber instead of fiber?
Thank you for your detailed answer @MichelB!
Do I understand correctly that for a test over several ports, there must be a corresponding test server in the network that can handle 8 Gbit/s upload and download from one connection?
And another question: I read in the community that the IB3 can manage up to around 4 Gbit/s upload and download via Wifi. Is that correct?
Greeting
Electricboi
@Herby I also referred to the screenshot from @ElectricBoi, which is in English. #Peanuts I can only agree with you to a limited extent, as this is not allowed to happen with incumbents and the corresponding corporate identity (corporate wording). Someone probably translated freely instead of using the translation table.