Hallo zusammen
Sehr interessanter Beitrag! Da es mich heute "eingeschneit" hat, hatte ich Zeit für mein AlixBoard. Mein Ziel ist es das Alix Board mit Ipfire fit fürs SCTV zu machen.
Ipfire ist installiert und funktioniert. (Passendes alix image installiert, Router ist gebridged, auf RED habe ich die externe IP, igmpproxy-0.1-2 via Pakfire installiert, die config files von Tux(ein riesen Dankeschön!!!) in die entsprechenden Ordner gespeichert)
Sobald ich SCTV direkt an den GREEN Port stecke, erhalte ich einen freeze...
Was ich nicht verstehen kann ist folgendes, zappe ich durch die Sender und drücke dann auf den Pause Knopf und dann wieder auf Play erhalte ich keinen freeze mehr! Das geht auch für Sendung die in der Vergangenheit liegen.
Hat jemand von euch dieses Verhalten auch schon festgestellt?
Vielleicht hat jemand von euch eine Idee, oder ich habe mich irgendwo in den config-files vertippt.
Grüess JBrauni
Ich poste euch noch meine files:
/etc/IGMPPROXY.CONF
########################################################
#
# Example configuration file for the IgmpProxy
# --------------------------------------------
#
# The configuration file must define one upstream
# interface, and one or more downstream interfaces.
#
# If multicast traffic originates outside the
# upstream subnet, the "altnet" option can be
# used in order to define legal multicast sources.
# (Se example...)
#
# The "quickleave" should be used to avoid saturation
# of the upstream link. The option should only
# be used if it's absolutely nessecary to
# accurately imitate just one Client.
#
########################################################
##------------------------------------------------------
## Enable Quickleave mode (Sends Leave instantly)
##------------------------------------------------------
quickleave
##------------------------------------------------------
## Configuration for eth0 (Upstream Interface)
##------------------------------------------------------
phyint red0 upstream ratelimit 0 threshold 1
altnet 239.0.0.0/8 #MBONE
altnet 224.0.0.0/4 #Well known Mcst
altnet 195.186.0.0/16 #Swisscom Infra
altnet 172.16.10.100/32 #SCTV Master Box
##------------------------------------------------------
## Configuration for eth1 (Downstream Interface)
##------------------------------------------------------
phyint green0 downstream ratelimit 0 threshold 1
altnet 172.16.10.100/32 #SCTV Master Box
##------------------------------------------------------
## Configuration for eth2 (Disabled Interface)
##------------------------------------------------------
phyint blue0 disabled
phyint tun0 disabled
phyint red0 disabled
/etc/sysconfig/firewall.local>
#!/bin/sh
# Used for private firewall rules
# See how we were called.
case "$1" in
start)
## add your 'start' rules here
#start for igmpproxy
/sbin/iptables -I IPTVFORWARD -i red0 -d 224.0.0.0/4 -j ACCEPT
/sbin/iptables -I IPTVINPUT -i red0 -d 224.0.0.0/4 -j ACCEPT
#end for igmpproxy
;;
stop)
## add your 'stop' rules here
#start for igmpproxy
/sbin/iptables -D IPTVINPUT -i red0 -d 224.0.0.0/4 -j ACCEPT
/sbin/iptables -D IPTVFORWARD -i red0 -d 224.0.0.0/4 -j ACCEPT
#end for igmpproxy
;;
reload)
$0 stop
$0 start
## add your 'reload' rules here
;;
*)
echo "Usage: $0 {start|stop|reload}"
;;
esac
/etc/sysconfig/rc.local>
#!/bin/sh
###############################################################################
# #
# Copyright (C) 2007 Michael Tremer & Christian Schmidt #
# #
# This program is free software: you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
# the Free Software Foundation, either version 3 of the License, or #
# (at your option) any later version. #
# #
# This program is distributed in the hope that it will be useful, #
# but WITHOUT ANY WARRANTY; without even the implied warranty of #
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
# GNU General Public License for more details. #
# #
# You should have received a copy of the GNU General Public License #
# #
###############################################################################
# Used for private calls after boot #
###############################################################################
/usr/local/sbin/igmpproxy /etc/igmpproxy.conf &