@Lori-77

Your PC probably doesn’t know the router, take a look under release and you’re connected to a new router. Windows also wants something

https://dyn.com/updater-windows/

---

@Schnuepfli wrote:

Hello Hed

I didn’t receive any. According to the App Store Info it is version 10.19.2.

---

@Schnuepfli

The official Home App is probably not yet 100% compatible with IB3.

Since I am also a test user for the Home app, I receive it via this channel.

I don’t know whether, when and how the IB3 testers will be provided with home app betas.

The productive Home App certainly does not yet fit 100% with IB3.

Deleting and reinstalling it from the App Store solves some things but not quite everything.

For me, for example, the WLAN speed test always shows 0 when uploading, which is of course definitely not true.

What already works very well is landline telephony via VPN to the IB3 with the Home App.

I made several phone calls in HD quality with it today.

Stable connections, very good sound quality, rather better than directly via the mobile network

Hello @Poweruser

Hello

Your message in the forum does not solve the problem.

I have various Internet Boxes 3 on which Dyndns is set up.

e.g

xy.internet-box.ch

ab.internet-box.ch

With an IB3 you can ping the Dyndns name from the PC. This also gives an answer.

With both Dyndns you can establish a VPN connection from your Android phone.

I restarted the IB3 remotely and didn’t need any improvement.

Have you noticed this too, or am I the only one?

Greetings Lorenz

@hed

Well then I would say, I’m waiting for things to come.

😉

Hello everyone

I solved the DynDNS problem!

After a factory reset, it works again.

I now got a different IP address and now it also works under Windows.

Greetings Lorenz

So I have to say I’m very satisfied so far. Installation worked great. Backup was restored and everything was back, including VPN.

I find WiFi better than IB 2 (range signal strength).

I hadn’t rebooted yet.

I think the included operating instructions are great.

I’m just about to put the IB 3 into operation. The red and white has been flashing for about 40 minutes. Is this normal? or do I have to pay attention to something?

I’ve now tested everything. Everything works, even VPN and VPN telephony via Home App. There’s just one thing wrong: I can’t pair the WLAN-Box with the IB3 in any way. I really tried everything, like resetting the WLAN-Box, rebooting the IB3 as well as the WLAN-Box and Ethernet connection. Nothing helps, the WLAN-Box lights up red permanently and logically does not appear on the IB3 device list. Reported the error.

But otherwise everything is perfect. This router will certainly never get warm, even in summer, with all these ventilation holes.

Hello @Chips

Put the WLAN-Box practically next to the IB3 and just press the + keys, what happens then?

I only know that from the IB2 field that I have to coax the WLAN boxes there from time to time until it works.

You can then also connect the network cable, use ports 1-4 and not the 2.5GHz

Greetings Lorenz

I really tried everything. My fingers hurt from pressing the pairing button. When pressed, the white LED on the WLAN-Box only lights up briefly and then lights up constantly red again.

Unfortunately, even good persuasion doesn’t help, I’m already thirsty from talking so much. I tried everything from 3cm to 3m distance. Even 15m doesn’t work.

---

@Chips wrote:

I’ve now tested everything. Everything works, even VPN and VPN telephony via Home App. There’s just one thing wrong: I can’t pair the WLAN-Box with the IB3 in any way. I really tried everything, like resetting the WLAN-Box, rebooting the IB3 as well as the WLAN-Box and Ethernet connection. Nothing helps, the WLAN-Box lights up red permanently and logically does not appear on the IB3 device list. Reported the error.

But otherwise everything is perfect. This router will certainly never get warm, even in summer, with all these ventilation holes.

---

Did you reset the WLAN-Box on the ground?

Is there any data from the WLAN-Box still available in the IB3 menu?

Did you use the included LAN cable when pairing?

@WalterB

Yes Walter, I did everything correctly. I can’t find any entries for the WLAN box in the IB3 GUI.

Chips

No entries are wrong, I just see the unpaired WLAN-Box greyed out.

@“x”#19917s

Leave the WLAN box cable on and just restart the IB3

Take a look at the WiFi channels to see if they are the same on the IB3, maybe take them under 64 and under 11

Hello @Chips

Have you already restarted the IB3?

Do you see all the devices that you have plugged in via the cable?

What is important is that you have already sent the report to the special address.

In my case, two devices were no longer visible, but after a reboot all devices were there again. I reported this immediately.

Greetings Lorenz

@Poweruser

…I’ve tried that too…tried everything several times.

@Chips the image of the IB3 device list is incomplete? Behind the “Mac Address” column you should see a pencil and a downward arrow for each device. Click on it and you can delete the grayed out WiFi box. Then restart everything and repeat pairing with cable.

Do you already have the latest software on the WiFi box?

Thomas