Hi @seyfcom,

Yes of course… Does that help you as an answer? 😛

However, it would be good to know on which devices you enable this?

Have you already activated SIP credential on your swisscom login and received the data by SMS?

What menu and what is requested on your SIP devices? Are they indeed SIP?

Roman

@RSA Hi,

Yes yes I have the SIP credentials and everything but I can’t configure a softphone… I tested Bria solo and MicroSIP but it doesn’t work.

I am actually behind a firewall, is this the problem?

I can test on another wifi line with a laptop but haven’t really had the chance to test.

I’m going to have a Yealink 46G (the one recommended by swisscom, and I’ll have to install it too, we’ll see when it arrives.

@pioupiou hello

Can I have an idea of ​​the settings you made on MicroSip please! thanks in advance!

Hi @seyfcom,

So it’s certain that your firewall will pose a problem, unless you configure it from A to Z, which is quite tricky…

Regarding the T46G, you will need to connect it directly to the swisscom router to avoid problems!

Roman

@RSA

For the T46G yes that is what is planned!

For softphone apps, I would like to understand a little better what is what because each application has its own vocabulary, it’s a strange world. However, I am in IT, it is not a new world basically…

but at first glance, if you connect directly to the wifi of the swisscom router, it should work… if you are on a smartphone, the 3/4G connection would be enough!

My question concerned the software, softphone, not standard telephony if ever. But thank you. With Zoiper I can receive incoming calls, but outgoing calls are made, but no sound… With the others I haven’t succeeded… quite strange.

I understood your question… but we must eliminate the firewall problem first, because there is no worse for VoIP, that’s why I was talking to you about 3/4G to test the application on smartphone, because the settings are the same!

Zoiper works behind your firewall? with the same settings as other applications? If this is the case, you can be 80% sure that the problem is linked to the firewall…

Afterwards, you didn’t say if you used the applications on PC or smartphone or tablet…

You want help from the forum, you have to give the information about the devices, software, etc… Because as I told you, your settings seem correct, so you have to remove and test without adding of material.

I filled in the SIP server field

which you have not completed.

The SIP Proxy server needs to know which server to redirect its content to the SIP server.

The rest is the same.

---

@seyfcom wrote:

@pioupiou hello

Can I have an idea of ​​the settings you made on MicroSip please! thanks in advance!

---

Good morning,

Has anyone already configured a Mitel phone with Swisscom SIP Credentiel? I got a 403 error message while checking.

Basic SIP network settings

Thank you for your help and best regards.

@Kieppessioy31

see this post on the German-speaking community by POGO1104 from April 7, 2019

Mitel 6863i (Google Translate)

_Would you like to operate in a Centro Business or in a Swisscom Internet box?

_

With the “external” information SIP Credentials , you are looking at:

SIP Credentials

With local SIP credentials on the internet box you can watch:

Configure local IP telephony

_EDIT:

I found in the Digitec forum:
Compact instructions:
Swisscom (local IP telephony access data) -> Mitel (line 1):
Login Name -> Authentication Name
Login password -> Password
Internal -> Telephone number
Private -> Screen Name
The rest of the fields_Basic SIP Authentication Settings_are empty
Internal IP of the router Swisscom Routers -> Proxy Server, Outbound Proxy Server, Registrar Server
5060 (port number) -> Proxy Port, Outbound Proxy Port, Registrar Port
3600 -> Registration Period
Remaining fields in Basic SIP Network Settings as 0.0.0.0 or 0, Conference Server URI empty
Remaining fields on Standard
Both of my Mitel phones work with it. I have two Swisscom lines. Both phones ring for incoming calls on both numbers. They indicate with the line light or ringing the number called. To do this, I defined 4 connections on the Swisscom router (one connection for each telephone and each of my numbers). With outgoing calls, you can choose which number to go out with.
You can talk to each other internally, even if it wasn’t a requirement._

[Question about Mitel 6863i](https://www.digitec.ch/fr/s1/QuestionAndAnswer/will-this-phone-be-compatible-with-the-new-swisscom-internet-box -as-they-close-their-analogue-connec-70417)

Thanks, I’ll try this as soon as I get back to the office.

Hello everyone

I am trying to configure my Yealink T46G with this configuration, but without success. I have an OVH account for a French number, no problem. Just Swisscom which doesn’t work.

Thank you for your support if you managed to configure it or your idea welcome. I specify it is not a swisscom (tel)

Thanks in advance

Stephanie

@Alpinecare

> I specify it is not a Swisscom (tel)

Yealink on a connection with subscription inOne Home or inOne SME at Swisscom

Then connect with SIP Credentials to an Internet Box

for a complete and professional response

call the Hotline for Clients commerciaux 0800 055 055 (it is also possible to be called)

or contact by formulaire

@Alpinecare Hi Stéphanie,

I don’t want to be mean, but when you don’t know, the best thing is to contact professionals… And looking at the first page of the post, you would have seen a photo of the config that I posted…

You have reversed the fields “username” which is the telephone number and “registration name” which is the NC….@swisscom.

You just had to identify the data and fields that are the same!

Reversing that should work.

Roman

PS: it may take 1-2 minutes for the connection to register or even to restart the device.

@RSA Hello Romain Thank you for your answer, wouldn’t your answer be a little sexist? 😓 yes I am a woman and I like to learn and if I really can’t anymore I ask for help.

You’re right, I skipped this error, but it still doesn’t work 😞

Good day

Stephanie

@“x”#203476absolutely not sexist^^ I would have made the same comment for a guy 😉

Afterwards, for a landline, this phone is preferable in my opinion:

https://www.alltron.ch/fr/product/141437

If that doesn’t work, I would check the password, because between O or 0 you can easily make a mistake or with I and l…

the ideal is to copy and paste the password. You must also check the internet connection above as well as the IP parameters

Hello Black Mamba, I configured a Yealink T46G (with unrestricted Yealink firmware) and it works well with local SIP credentials. Internal calls also work. Unfortunately, call transfers do not work internally (from DECT to local SIP and vice versa).

According to the packet captures I have made, the functionality is simply not implemented in the Internetbox. Do you happen to know more?

In fact the transfer fails without error. I call the Yealink from a DECT, I transfer the call to a 2nd DECT. The Yealink is happy and from its viewing deck communication is complete. But the DECTs are still talking to the Yealink on silent lines.

My intuition: although REFER is not offered by the internet box, the Yealink still tries and the box still responds OK, but without obeying. Would that be fair?

@Le_Chat

thanks for the contribution

refer to the Swisscom help section

HD-Phone Yealink T46G – Help | Swisscom

and in particular in the section

Divert calls and stay in touch – Help | Swisscom

see also this information on the Community in German

Gelöst: Yealink SIP-T48S - Anrufweiterleitung geht nicht | Swisscom Community​

“However, for transfer to an IP phone (e.g. Yealink T46G, HD-Phone Sarnen), an additional number/line is required for inOne KMU Office.”