@daniburki das einfachste ist wenn Du das TV in Centro Grande steckst, voraus gesetzt Du hast nicht den CG im Bridge Mode.
Sonst hier die Einstellungen der FW: https://www.tuxone.ch/2012/06/pfsense-21-mit-swisscom-access.html
hier,hier
das musst Du dann ableiten auf deine Firewall Einstellungen, ob es funktioniert weiss ich nicht.
IGMP proxy
Unter Services -> IGMP Proxy werden zwei neue interfaces erstellt, ein upstream und downstream Interface:
Downstream Interface
InterfaceLAN
DescriptionSwisscomTV downstream
TypeDownstream Interface
Threshold1
NetworksLokales Netzwerk, in dem die Swisscom TV Box drin ist (z.B. 10.1.1.0/24)
Upstream Interface
InterfaceWAN
DescriptionSwisscomTV upstream
TypeUpstream Interface
Threshold1
Networks224.0.0.0/4 213.3.72.0/24 195.186.0.0/16
Firewall
Nachfolgend müssen noch einige Firewall-Regeln gemacht werden.
Damit Swisscom TV funktioniert muss man ausgehend Multicast erlauben. Am einfachsten geht dies, wenn man bei der Regel welche ausgehenden IPv4 Verkehr erlaubt, unter Advanced Options:"This allows packets with IP options to pass. Otherwise they are blocked by default. This is usually only seen with multicast traffic.", markiert.
Interface: LAN
ActionPass
InterfaceLAN
Address FamiyIPv4
Protocolany
SourceLAN net
Destinationany
DescriptionDefault allow LAN to any rule
Advanced Options[X] Allow IP options
Interface: WAN
ActionPass
InterfaceWAN
Address FamiyIPv4
ProtocolIGMP
Sourceany
Destinationany
DescriptionIGMP (Swisscom TV)
Advanced Options[X] Allow IP options
ActionPass
InterfaceWAN
Address FamiyIPv4
ProtocolUDP
Source224.0.0.0/4 213.3.72.0/24
Destination224.0.0.0/4 213.3.72.0/24
DescriptionMulticast (Swisscom TV)
Advanced Options[X] Allow IP options
ActionPass
InterfaceWAN
Address FamiyIPv4
ProtocolUDP
Source195.186.0.0/16
Destinationany
DescriptionUDP Swisscom infrastructure (SwisscomTV)
@Tux0ne könntest Du bitte mal weiterhelfen Danke.