Direct wifi connection TV Box 2.0 <-> Internet Box

Hi, I do. But it must be said that it is not recommended, because it is not yet ready. In addition, Swisscom does not authorize it at the moment.

On your TV box, press WPS behind it and do the same with the Internet Box before 2 minutes. The quality is not good (Freeze etc…) So if it doesn’t work, don’t complain

Why not claim since the possibility of WIFI connection is a selling point for TV2.0?

It works very well over Wifi but via a Wifi Duo Kit 😉

As already indicated:

This is supported with a connection kit sold separately and not supported between the IB and the box!

Good morning,

I have the 3rd box in the office, which serves as a guest bedroom, it works very well with wi-fi without adding anything else. distance from the router approximately 9 meters.

Have a good day and have a good weekend.

It works well in Wifi between the 2.0 box and the Internet Box.

(erratum: it works no worse than wired in RJ45)

On the other hand, this type of TV Box 2.0 does not support hidden WiFi networks!

If I configure it in wifi with the visible network and then hide the wifi, the box loses the connection.

Which is a shame in 2014!!!!!

I really hope that Swisscom will bring TV 2.0 to maturity quickly…

Because there, with all the other problems, it’s really a test version.

Good morning,

Yes works with other boxes.

Yes program in HD ok.

Yes fiber network.

2 cable TV boxes, living room and bedroom, office with direct Wi-Fi.

I wish you a good Sunday.

Good morning,

Quick question regarding the connection of the duo connection kits.

I installed the 2.0 box last night and when initializing it asked me

from the associate to the internet box.

I assume that it is connected via wifi via the network card of the box and not

by the connection kits (hence a pixelated and frozen image at times since this morning)

Should I reset the TV box and reinstall everything while ignoring the step (wps button on the box)?

FYI, I have the latest Duo connection kits (the white ones)

I couldn’t find any documentation or the procedure to connect everything correctly

and it seems to me that the signal from the connection kits is more powerful than the Internet-Box / TV Box wifi.

Thanks in advance

Good morning

I made the direct connection this week after a lot of problems with my powerline installation.

For me it works well - I have the internet box with Vivo M (40Mb/s) 10 meters from the box in another room. It’s not 100% perfect but completely usable for now. Purchasing the official wireless connection remains a possibility if necessary but CHF198 is not negligible

I hope Swisscom formalizes this capacity of the box as soon as possible, as I said CHF198 in addition is too much

I also find this montant much too high!

By digging around a little, I think I found equipment offering almost the same functions, but for around 40.-! It remains to be seen if it will work…

Hello everyone

Connecting the TV Box via wifi directly to the Internet Box doesn’t work, even from 20cm away!!!!!!!

In fact it works, but the image freezes, pixels appear…not cool.

I am very disappointed that Swisscom made me believe it and sold me Vivo. Especially since they know it well.

So, 2 solutions: increase the power of the wifi. But no guaranteed results.

or simpler buy the DIVOLO sockets at interdiscount and that works well. (Approximately 100 Frs for 2 sockets)

So

I deleted the wireless kits 2 weeks ago. It works perfectly well over wifi from the internet box. I didn’t notice any difference. There is a distance of 6 meters. The internet box is placed high up.

There may be a device disrupting the connection.

Good evening, I will switch to Swisscom TV 2.0. and I would like to know if a wireless connection is possible without accessories between the Internet-Box and the TV-Box 2.0. I currently have a Ruckus wireless system, if a wireless connection is not provided on the base hardware, can I use this Ruckus system as a wireless link? Thank you for your help

I just upgraded to TV 2.0 and tested it.

The wireless connection can be made directly between internet-box and TV-Box: simply do not connect the ethernet cable and launch a hardware search on the internet-box.

In the configuration of my apartment, it works flawlessly. 198.00CHF of wifi box saved!

At the same time, since it’s not documented by SC, I guess we shouldn’t complain if it doesn’t work correctly…

Good morning,

Apologies in advance if this question has already been asked:

When I hid the name of my Wlan network, my tv-box 2.0 no longer connected via wifi to the router. Is it normal to leave the name of my network visible so that my tv-box is connected via wifi to the router?

Thank you for your response