@Lori-77: The port forwardings were definitely not saved (don’t know what you mean by “according to IB3”), but perhaps they are stored in the local file. I think the whole thing with the save in Kundencenter is intended more for the most important settings of dummy users, so that after a device replacement or firmware update they can continue to work normally and don’t have to use support. Let’s be honest, most users are interested in the SSID and the WiFi password and of course the phone book if you want to use that.

Nevertheless, it is simply a shame that more experienced customers are lulled into the security of not being able to lose their settings. But the same applies here: Whatever configuration you do, you should document it (which of course doesn’t help me with 30-40 network devices that I have named, I would have to hack them in again despite the documentation).

Show original language (German)

@hed C: still missing: exactly the settings are saved as today (telephone, WiFi)

@Mindscope manually assigned names and assigned icons are not saved. After a reset they are called PC-123 again.

That’s why I’ve gotten into the habit of carefully documenting all the settings in my network. OneNote works quite well for this, e.g. hyperlinks directly to the respective devices (in my case switches, NAS, IP telephones, etc.) or directly to a subpage of the IB are useful.

Thomas

Show original language (German)

Hello everyone,

When you replace your router or reset it to factory settings, certain settings are automatically applied. Other settings can be restored manually using a configuration file.

The configuration file can be saved locally or in Kundencenter. In both cases it must be reinstalled manually.

Automatically Recovered

  • WiFi settings
    • SSID
    • Password
    • Security settings
  • Telephony settings
    • Line settings (incoming and outgoing phone numbers)
    • HD Phones
    • Phone book
    • Local SIP accounts
  • Password router web portal
  • IPv6 setting
  • Dynamic DNS

Configuration file

  • Device names and icons
  • Network settings
    • Internet box IP address
    • Subnet masks
    • Static IPs
    • Enable IP address distribution (DHCP).
    • DNS servers
  • Firewall settings
  • Port forwarding & UPnP
  • VPN accounts
  • WiFi transmission power
  • LED settings (brightness)

Greeting,

MichelB

Show original language (German)

@kaetho wrote:

….

@Mindscope manually assigned names and assigned icons are not saved. After a reset they are called PC-123 again.

……

Ok, then you have to restore the config if you want to restore these things. But I’ve rarely done it so far because I usually want to do as little manual work as possible and want the installation to run as “out of the box” as possible.

Thanks @MichelB for the clarifications.

If I reset the box, I don’t want to destroy it again with an old, possibly “messed up” config. That’s why I’ve gotten into the habit of manually updating the things that don’t come back and that I really want back after a reset.

Thomas

Show original language (German)
  • Lori-77 has responded to this post.

    Hello @Lori-77, that’s exactly what I read and thought to myself, if port forwarding is mentioned, then pretty much everything is saved. As I said, not even these were restored. The information is simply wrong.

    Show original language (German)

    @MichelB: I saved everything in Kundencenter, but the supporter couldn’t tell me how to restore it, even after consulting the technician, and ultimately said that it would probably be restored automatically, and if so after that If anything is missing, it probably won’t be saved. Can you actually actively retrieve this from the Kundencenter? How?

    Show original language (German)

    As far as I know, the same scope is backed up with manual configuration backups - whether in Kundencenter or locally on the PC.

    @Mindscope wrote:

    Can you actually actively retrieve this from the Kundencenter? How?

    Have to be honest - I haven’t found the place in the (new) Kundencenter (MySwisscom) where you could initiate the config restore… @Anonymous @ThomasS @MichelB?

    Show original language (German)

    ….keep on rockin'

    It actually seems that this feature was lost in the redesign. 🙈

    I’ll have it looked at on Monday.
    Please excuse the inconvenience and use the local backup in the meantime.

    Thanks,
    MichelB

    Show original language (German)
    • WalterB has responded to this post.
      5 days later

      MichelB

      Unfortunately, even after a few weeks, the backup from the Internet box in Kundencenter is still not accessible. When you open the link in Kundencenter, it jumps back to the beginning.

      System Windows 10, browser Firefox.

      Router-Backup.jpg

      Show original language (German)

      Installationen, Netzwerk, Internet, Computertechnik, OS Windows, Apple und Linux.

        @MichelB: I have now received an old IB 2 (because with the IB 3 the DHCP server always stops working after a few days). But the exact same problem exists, i.e. the settings can only be retrieved from a locally saved file. In this case, did “redesign” mean the website and not the IB at all?

        At least I have now been able to understand that the recorded network device names are restored from a local file, which is great. The port forwarding will also be back afterwards. Unfortunately, almost nothing seems to be saved regarding WLAN. I assume this is because the SSID and key are restored independently of the backups at Anschluss of a box. That’s why you probably thought that you don’t have to save any WLAN settings in the file. Unfortunately, things like a permanently selected WiFi channel or the channel bandwidth are missing. You can live with that, but of course you may be surprised that the WLAN no longer works so well after a restore (fixed channels can be an advantage over automatic channel selection in many constellations, especially if you operate several access points). But once you know that, you can certainly live with it, you adapt quickly.

        Show original language (German)

        @Mindscope

        The “redesign” meant the Swisscom Kundencenter homepage where the router backup page can no longer be opened, but you don’t normally need that if you save the backup from the Internet box on your own computer either way.

        Show original language (German)

        Installationen, Netzwerk, Internet, Computertechnik, OS Windows, Apple und Linux.