Bonjour, voici la solution:

General Settings:

Trunk Name: SwisscomVoIPviaMyPMEOffice
Outbound Caller ID: “XYZ”<+4121XXXXXXX>
CID Options: Allow Any CID
Maximum Channels: 2

Dialed Number Manipulation Rules:

( prepend ) + prefix | match pattern

Outgoing Settings:

Trunk Name: swisscom

PEER Details:

type=friend
context=from-pstn
host=192.168.1.1
disallow=all
allow=alaw&ulaw
qualify=yes
username=+4121XXXXXXX

secret=MotdePasse123
nat=yes

Register String:

+4121XXXXXXX:MotdePasse123@192.168.1.1

P.S: Très important, le “Caller ID” doit obligatoirement être renseigné (juste)!

Meilleures Salutations

@lmu77 Hello, sorry I only saw the alerts for your messages now.. Have you managed to move forward on your side?

Would you be kind enough to share your information?

What configs do you use with Swisscom and Asterisk to connect with “My PME Office”?

Thank you in advance for your response,

Best regards.

Hello Xtreme66, for your case, You must have a subscription: MY PME OFFICE + Option: Fixed IP it seems to me, but my problem is more complex, I just had Swisscom technicians connected remotely but they have not yet found the solution…

Scenario:

- Subscription: MY PME OFFICE L + Option: Fixed IP

- Centro Business PSB4212N

FW Version: 7.10.10

WAN Connection: WAN-VDSL-PPP
WAN Mode & Profile: VDSL2, Profile 17a, PTM Mode

- ZyXEL ZyWALL USG 300

FW Version: 3.30(AQE.7)C0

---———————————————- ——————————-

Hello, I had a Business Internet Light + Fixed IP + SME Office 4* subscription with a ZyXEL P870 bridge modem with an ISDN Multi-line and a ZyWALL USG 300 router/firewall to manage everything else (VPN’s, PPPoE connection , etc.). The Bluewin TV was on another Centro Grande router and on a second line.

Currently, I have just migrated to “ALL IP” with My PME Office L + Fixed IP, and I only have a Centro Business to manage IP telephony, Bluewin TV, PPPoE connection, etc. The only problem is that I can’t set the ZyWALL USG 300 firewall to manage VPNS and have access to the Centro Business IP (192.168.1.1) for other reasons. Bridge or PPPoE Passtrough mode works for VPNS and to manage the PPPoE connection but no more access on the Centro Business router (192.168.1.1).

I then saw that we can create a DMZ, that is to say, activate IP passthrough (Local security gateway) on LAN1. I tried to do it but without success, on the ZyWALL USG 300, on the WAN port I configured with the following configs (according to the help of the Swisscom hotline and the documentation):

WAN Interface (ge7)

IP: 172.31.255.6
SUBNET MASK: 255.255.255.252
GATEWAY: 172.31.255.5
DNS1: 195.186.1.162
DNS2: 195.186.4.162

---———————————————- ——————————-

LAN Interface (ge1)

IP: 192.168.10.1

SUBNET MASK: 255.255.255.0
DHCP: 192.168.10.33 - 192.168.10.50

---———————————————- ——————————-

With this config I cannot see (ping) the Centro Business on IP 192.168.1.1 nor have Internet on a Client PC in the subnet 192.168.10.0/24. On the other hand, if I directly connect the cable from LAN1 (Centro Business side) to a PC network card and if I enter the same configs as for the WAN port, that is to say:

IP: 172.31.255.6
SUBNET MASK: 255.255.255.252
GATEWAY: 172.31.255.5
DNS1: 195.186.1.162
DNS2: 195.186.4.162

I have the Internet working and I can ping 192.168.1.1, so everything works as I want, but that doesn’t solve my problem with the ZyWALL USG 300.

Can you help me please?

Thank you in advance for your response,

Best regards.