@micro schrieb:
Bei mir macht ein GS105E und ein GS108E kaskadiert Probleme mit dem HD Multicast. Vermutlich ein IGMP-Problem. Auch mit dem GS108T klappt es nicht.
Es kann, muss aber nicht funktionieren.
Ja das ist klar. Solange du da noch mit den GS108E oder GS108T dazwischen funkst wird es nicht funktionieren. Gehst du aber nur über die GS105E wird es funktionieren. Das ist kein Können, das ist dann ein Müssen 🙂
Allgemein funktioniert eine Fritzbox mit SCTV sicher. Die Fritzbox hat nur ein Problem mit IGMP Messages welches bei mehreren Boxen zu einem Unterbruch führen kann. Das kann und wird sicher gefixt. Das hat gar nichts mit Chipsatz zu tun. Das ist Blödsinn.
http://tools.ietf.org/html/rfc4541
A snooping switch should forward IGMP Membership Reports only to those ports where multicast routers are attached. Alternatively stated: a snooping switch should not forward IGMP Membership Reports to ports on which only hosts are attached. An administrative control may be provided to override this restriction, allowing the report messages to be flooded to other ports.
This is the main IGMP snooping functionality for the control path. Sending membership reports to other hosts can result, for IGMPv1 and IGMPv2, in unintentionally preventing a host from joining a specific multicast group. When an IGMPv1 or IGMPv2 host receives a membership report for a group address that it intends to join, the host will suppress its own membership report for the same group. This join or message suppression is a requirement for IGMPv1 and IGMPv2 hosts. However, if a switch does not receive a membership report from the host it will not forward multicast data to it.
... hat zur Folge das der Host keine Antworten auf Fragen des IGMP Queriers gibt und der Stream... abbricht 🙂
Hängt man wie Herby oder ich beim Centro Tux einen GS105E dazwischen welche die Messages richtig handelt funktioniert es auch jetzt schon mit der Fritzbox.