And I personally recommend using additional programs (optionally; of course also on another Pi):

• Plex Media Server
  • Watch your own films and series from your own server; App already pre-installed on Swisscom TV
  • The perfect Netflix alternative for these; who have digitized their DVD library or VHS cassettes and want to watch them on smartphones
• OwnCloud / Nextcloud
  • Data storage for those who see MyCloud, Google Drive and Co as the enemy.
  • Storage of your own data as well as collaboration with colleagues and others possible.
  • Can also be used as a Samba share in your own network.

A third Raspi has arrived. This time a Raspberry Pi 4 with 8GB RAM and an additional SSD hard drive. I installed NextCloud on it (I became aware of it through @DomiP, thanks at this point 👍)

The installation was still child’s play, but configuring web access without VPN, but with DDNS and an SSL certificate from lets encrypt, took a few hours (especially working out “how to” 😉).

Now the electronic provision of various documents and files for the club should be as convenient as with mydrive and co., simply with its own “in-house” platform. Let’s see how long-lasting and reliable it works.

@kaetho welcome to the Nextcloud squad 🤣. In fact, the setup is very tricky and the configuration of SSL is also very complicated to set up using standard means. The easiest way is usually to use distributions that have already been configured, but the visibility is relatively poor. 😉

@DomiP @kaetho @MiriamF [https://www.heise.de/ratgeber/Gegenspionage-im-Heimnetz-So-enttarnen-Sie-Datenrutschen-mit-dem-Raspberry-Pi-4617074.html](https://www.heise.de/ guide/counter-espionage-in-the-home-network-how-to-uncover-data-spinning-with-the-Raspberry-Pi-4617074.html).

Is there an extension to the Pi-hole.

@MiriamF @kaetho Thank you for the extremely helpful instructions! I received my Raspi 3+ kit this morning (a Raspi 4 is very “overkill” for a simple Pi-hole) and in the afternoon my Pi-hole was already integrated into the private network.

I’m leaving out the Swisscom Internet box and the TV-Box - I don’t want to overload my Pi-hole with Netflix DNS queries 😉

Yes, cool. I did it too.

It’s working so far and I’m already on my third Raspi.

A housing that fits ( with a little filing) I also found it.

PoE is a great thing, although Swisscom itself doesn’t really offer it or anywhere.

IMO with the Raspy PoE hat it’s a bit loud. Almost has the same noise level as my NAS.

I’m also on my 3rd Raspi, a 4th is being considered. Unfortunately I couldn’t find a suitable housing, so I’m making one myself 😉

All with PoE, nicely stored in a rack in the basement, then the volume no longer plays a role.

Rack version. Awesome… 😁

I installed the PI-Hole on a Synology NAS, works perfectly.

If you have a Synology NAS and can install Docker, you should take a look at the video here.

Super simply explained.

Thank you for the great instructions!!!

But unfortunately this didn’t quite work for me. I installed Pi-hole on my Raspberry Pi 4 as per the instructions. I can also access the dashboard via IP address (i.e. in the browser). Then I see that nothing is happening. For example, chip advertisements are still displayed on my devices. However, I changed the DNS server on the router to the IP address of the Raspberry Pi, but this still didn’t work. I have also already tried changing the DNS server on my Windows device only. This was successful with IPv4 & IPv6 because this is displayed correctly in the CMD with the command “ipconfig /all”, i.e. the IP address of the Raspberry Pi for the DNS server.

Does anyone know what I did wrong or what I forgot to do?

Thank you very much and best regards

Hi everyone,

I have now connected my (old) Pi to the Internetbox 3 and everything works, with one exception: only 2 clients are displayed in the Pihole, namely localhost and internetbox.home, although all network clients of course go via the Pihole.

Does anyone have an idea what else I need to set so that all device names / hostnames are “reported” to the Pi?

@POGO 1104: very good tip with the VPN, I actually wanted to use the VPN function of the Internet box there.

@schafholt every device in your network connects to the Internet via the IB. This means that the DNS requests also run via the Internet box. You can do this in your iPhone’s DNS settings (here) or in the DNS settings of an Android (here) and on Mac ([here](https://www.hellotech.com/guide/for/how-to-change-dns-server-windows-mac#:~:text=Windows%2010%20Computer- ,To%20change%20your%20DNS%20server%20on%20a%20Windows%2010%20computer,the%20following%20DNS%20server%20address.)) or under Windows ([here](https://www.hellotech.com/guide/for/how-to-change-dns-server-windows-mac#:~:text=Windows%2010%20Computer -,To%20change%20your%20DNS%20server%20on%20a%20Windows%2010%20computer,the%20following%20DNS%20server%20address.) ) adjust the DNS settings and enter your PiHole there.

@DomiP That’s right, you could do that, but I don’t want to. In my Fritzbox, all devices were connected identically and the hostnames were “passed through” to the PiHole.

I played around with conditional forwarding in PiHole, but that didn’t solve it either 😞

Conditional forwarding

If not configured as your DHCP server, Pi-hole typically won’t be able to determine the names of devices on your local network. As a result, tables such as Top Clients will only show IP addresses.

One solution for this is to configure Pi-hole to forward these requests to your DHCP server (most likely your router), but only for devices on your home network. To configure this we will need to know the IP address of your DHCP server and which addresses belong to your local network. Exemplary input is given below as placeholder in the text boxes (if empty).

And here is the solution

I don’t have the option “Require DNS server via DHCP option 6” in the network settings / DHCP of the InternetBox 3. Enabled. After restarting the client / re-registering to the network, the host name is still passed through.

I also keep the above-mentioned PiHole settings for conditional forwarding.

Thanks to all!

@schafholt is the option “DNS server notified via DHCP option 6” enabled?

I also installed a PI-Hole and got a blocked rate of 8.3%. I saw in YT instructions that they had to activate Unique Local Addresses (ULA) on the Fritz boxes so that they could get to 30%. Does this also work with the IB4?

Since my Raspi is still not available, I built a virtual Raspi (just for fun) in the VMWARE player, the ISO file can be found here:

Raspberry Pi Desktop for PC and Mac – Raspberry Pi

I installed Pi-hole on it following these instructions:

Block ads on every device in your house with a Raspberry Pi and Pi-hole - Raspberry Pi

And yes, all of this only took about 2 hours (it was my first contact with Raspi OS) and it worked the first time:

Even for owners of a Raspi, the VMWARE version of the Raspi should be very interesting if you want to develop and test something “outside” the Raspi.

@hed I’ve been running PiHole on Docker on my NAS for a long time. You can currently use the Raspi

at https://rpilocator.com/ where you can buy some

@user109

I’ve been on the waiting list at the pi-shop for a few months, but I’m in no hurry. If the Raspi doesn’t come this year, it will come next year or in 2024, or… it doesn’t matter.

@hed I had my Pi in my hand within 1 week without a waiting list, via this page.