Were you still able to solve this with the SFP+ module or are you still using the 1 gigabit? I now tried with your settings and the SFP+ module of the IB3, with the two different numbers 1492 and 1500 and waited a long time, then I tried with registration, unfortunately without success.
Greetings Sam
Hello everyone
In this context, may I ask whether anyone knows what the situation is with rented providers and XGS-PON? Is e.g. B. Sunrise (my current provider) able to provide an offer? Green? Init7? Etc…
And does anyone know what the status of the announced Fritz boxes 5530 and 5550 is? Apparently they should also be able to do XGS-PON.
Dosc
@sam1970
I haven’t gotten around to testing the whole thing with the 10Gbps module yet. The whole trouble with the GF cable took up too much time…
Currently working with the CB2 again, as everything there is already configured and working according to our wishes.
@Sennhauser-ITS and all other Zyxel buyers
I had just received a telephone with Studerus and an email from Zyxel.
Reply Zyxel
Good day
To use the AX7501 on an XGSPON-Anschluss from Swisscom, the model intended for the router must be used. The certification is only valid for the module and router together; only then is the router allowed to activate the module’s link.
The article number (Studerus AG) for the module is:
4342 Zyxel XGSPON SFP+ module
As a dealer, you can order these directly from Studerus AG or of course also via Brack.
(unfortunately I can’t find the part at Studerus or anywhere else)
Answer from Studerus
The Zyxel AX7501 without SFP+ module should never have been put on sale….. There should be no problem returning it to Brack with reference to Mr. Elsener Studerus.
Greetings SAM
Hello everyone,
I’m currently in the process of upgrading XGS-PON as a private customer to the actual 10gbit (or at least trying to).
I have already created a post about this in the English forum: [/t5/Internet-General/XGS-PON-with-custom-ONT/td-p/631780](https://community.swisscom.ch/t5/Internet- General/XGS-PON-with-custom-ONT/td-p/631780)
However, I was referred here.
To summarize the post, I’m currently using a Mikrotik CRS326 as a switch for my internal network and have a virtualized router (VyOS) running libvirt on a server running Centos. Since the Intel sfp+ network card in the server does not correctly recognize the Hisense module from Swisscom, I have so far tried to attach the module directly to the switch and connect it from the switch to the server via a bridge and a DAC.
So far I have used a DHCP Vendor Client ID with a value of 100008.0001 and a VLAN tag 10 as settings, but I can’t get an IP that way. Unfortunately, I only have limited knowledge of XGS-PON. As far as I understand it, the Hisense module should already act as an ONU, so I wouldn’t need another device.
I’m a little hesitant about the HN8255Ws because I don’t really see the added value. Does “Swisscom Certified” simply mean that the device accepts the sfp+ module from Swisscom?
Greetings Carlo
@cfi2017 hello carlos, the Mk Switch does not support the SFP+ (driver is missing), it is the same as with the G.Fast SFP.
The Huawei HN8255Ws has a security problem - you cannot set the password for the admin account via the web Gui. Only via ACS and OLT.
The trick with the config file and the additional tool no longer works since the file was additionally salted (Salt (SHA encryption derivative)).
If you want to know more just ask.
It is now clear… there is no separate SFP+ for the Zyxel that is Swisscom certified… only available as a complete package.
I think this will probably affect all modems and SFP+ modules.
Here is my second email from Zyxel
Good afternoon Mr. Sam
The product 4342 is not available to buy as a single product as it is only intended to be included in a bundle with the AX7501.
The article for this is [https://www.studerus.ch/de/products/zyxel-ax7501-with-xgspon-sfp/](https://www.studerus.ch/de/products/zyxel-ax7501-with -xgspon-sfp/)
Kind regards
Dashmir Kasa
Hello everyone
I’m also looking for a solution so that I can use my 10Gig Swisscom line at home.
This thread is marked as “Solved”, although after reading through it I’m not so sure.
I would have ordered the Huawei HN8255Ws. So did you get this to work? IPv4, 10Gig and Multicast?
Do you have fewer problems with the Zyxel?
Thank you for your help!
I received the new Zyxel router from Brack today. Unfortunately it was preconfigured with ipv4 plus ipv6 and without option 60, which didn’t work at all.
After adjusting the WAN interface and network login in the browser, everything works.
By the way: Swisscom TV Box with multicast also works perfectly!
Albatross
Thanks @Albatros2! So I will order the Zyxel instead of the Hauwei.
