Thanks for the tip. But unfortunately the same result as with the line I tried:

mount -t cifs //192.168.1.ZZZ/ data /media/ftp -o user=nasuser,password=nasuserpw,sec=ntlm

"mount error(115): Operation now in progress
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)"

My settings on the IB2:

Fixed IP for applications: 192.168.1.ZZZ

Applications>Central Storage = On, Password Protection= on/

User= nasuser

Password=nasuserpw

My settings on the Raspi:

Fixed IP = yes

User = puser

Password=puserpw

Group=users

Also tried with an entry in fstab:

//192.168.1.ZZZ/Data /media/ftp cifs username=nasuser,password=nasuserpw,uid=puser,gid=users 0 0

Unfortunately it didn’t work either.

If I ping the IP address: 192.168.1.ZZZ of the NAS on the IB2 via sudo everything is ok:

"17 packets transmitted, 17 received, 0% packet loss, time 16669ms
rtt min/avg/max/mdev = 0.446/0.542/0.693/0.070 ms"

There must be something to be done!

But as a Linux greenhorn, I’m at my wits’ end. Even with the wiki on the side.

Show original language (German)

Well, I really want to find out more! Like “Would”:yumyum: your solution looks like the faster USB 3 disk to use with the Raspberry as an FTP server?

Show original language (German)

This will somehow get it to work 🙂

But this is probably not the right forum for this. As you wrote, you can ping the NAS online without any problems, so you’re probably better off in a Raspbery forum.

My tip: ask in a Raspery forum and/or search for mount and USB3.

Show original language (German)

@Erni49@ wrote:

Well, I really want to find out more! Like “Would”:yumyum: your solution looks like the faster USB 3 disk to use with the Raspberry as an FTP server?

A Raspi is a nice thing. There are many IoT stories that can be produced with it. The VKF/GV thus realizes, for example: hail protection.

If you write something via xmpp, it runs via a Raspi.

But quickly and Raspi, that’s mutually exclusive either way 🙂

Buy a smart NAS. That’s fast.

Show original language (German)

Thanks to everyone for their willingness to help. I’ll take a look at the forums mentioned.

@Tuxe0ne:

I was looking for a Raspi solution for my own FTP server that is supplied with videos and images from 2 nesting box cameras.

I have this solution. There was only talk of optimization here.

I’m not looking for any possible applications or gimmicks. I’m also not dogmatically for or against NAS, IB, Win, Linux or anything else. For me these are all just tools, nothing else.

The smart NAS is not an improvement to the solution because it consumes too much power.

Show original language (German)

hello @Erni49

sry for ot: ​​the thing with the nesting box camera has been a project in the back of my mind for a long time. I just haven’t found a smart, good quality camera yet. do you have a tip for me? Greetings René

Show original language (German)
6 months later