Mikrotik TV-BOX

Good morning,

Here I managed to put the internet on my Mikrotik, but on the other hand for the TV-Box that’s another story.
The best part is that I do have a signal coming to the TV Box, but he doesn’t see it.

I’ll explain to you, when you watch a channel live it doesn’t work, for the TV box there is no signal, but if I go back a little or if I press pause, then the TV box switches from the Igmp protocol to the RTSP protocol and there I have the TV with a few seconds of lag.

I sniffed the network and noticed that the Igmp protocol that the box requests is not on a VLAN except with Swisscom in FTTH we are on VLAN 10, and that is where in my opinion it gets stuck .

I believe this is due to a routing problem which does not reach the TV box.

If anyone has an idea please.

THANKS

PS: When I have time, I will do a tutorial for Mikrotik routers explaining how to set it up with Swisscom.

Show original language (French)

Salut,

Oui IGMP est active, mais cela ne change rien.

02:32:43 pim,warning JoinDesired(*,G) = true: upstream neighbor for RP 1.1.1.1 for group 239.186.64.1: not found
02:32:43 pim,warning JoinDesired(*,G) = true: upstream neighbor for RP 1.1.1.1 for group 239.255.255.250: not found
02:32:44 pim,warning JoinDesired(*,G) = true: upstream neighbor for RP 1.1.1.1 for group 239.255.255.246: not found
02:32:45 pim,warning JoinDesired(*,G) = true: upstream neighbor for RP 1.1.1.1 for group 239.255.255.253: not found
02:32:49 pim,warning RX IGMP_MEMBERSHIP_QUERY from 1.1.1.1 to 224.0.0.1 on vif VWAN: source must be directly connected
02:32:50 pim,warning JoinDesired(*,G) = true: upstream neighbor for RP 1.1.1.1 for group 239.255.67.250: not found
02:33:19 pim,warning RX IGMP_MEMBERSHIP_QUERY from 1.1.1.1 to 224.0.0.1 on vif VWAN: source must be directly connected

En plus je ne sait pas lire l’allemand^^.

This post is in English