Loading firmware into detected PHYs...
Firmware version: Blackfin B0 v02-02-06
Loading firmware into PHYs: map=0x40000000 count=1
Halt the PHYs processors operation
Upload the firmware into the on-chip memory
100%
Reset the processors to start execution of the code in the on-chip memory
Verify that the processors are running: OK
Verify that the firmware has been loaded with good CRC: OK
Firmware loading completed successfully
internal_open: Done
Creating CPU ring for queue number 16 with 512 packets descriptor=0x0000000001271530, size_of_entry 8
Done initializing Ring 16 Base=0x000000200130c180 num of entries= 512 RDD Base=130c180 descriptor=0x0000000001271530
Creating CPU ring for queue number 0 with 1024 packets descriptor=0x0000000001270c30, size_of_entry 16
Done initializing Ring 0 Base=0x0000002001414ac0 num of entries= 1024 RDD Base=1414ac0 descriptor=0x0000000001270c30
CPU ring init Done
No active ports
cfe_main: button_pressed_cnt: wps=0, rst2def=0, wifi=0
Enter your password in 12 seconds, otherwise the device will reboot...
Enter password:
\=======================================================================================
Hier heißt es, ich habe kein Passwort, und es wird nach 12 Sekunden automatisch neu gestartet
