Hallo Zusammen Erstmal vielen Dank an alle, besonderns an @BurningRoli, für die Zeit und Mühe die ihr allen in die Problemlösung gesteckt habt. Dank der config.gateway.json und config.properties von Roli im Post von 29.08. funktioniert bei mir LiveTV wunderbar. Das Umschalten ist tatsächlich sehr schnell und findet ohne Artefakte statt. Allerdings funktioniert bei mir Replay nicht, sowohl bei Recordings als auch bei "normalen" Sendungen nicht. Das Verhalten ist so, dass das Recording/die Sendung gestartet wird dann aber stark "lagt", also als ob ständig gebuffert wird. Es kommt mal ein Bild, dann bleibt es stehen für ein paar Sekunden und dann kommt wieder ein Bild. Mein Setup: DrayTek vigor2680ac im Bridge Mode -> USG3P -> USW -> Netgear GS108t -> SCTV2 - USG3P hat DHC Option 60 (Vendor ID) auf eth0 gesetzt - IGMP Proxy mittels config.gateway.json konfiguriert - Firewall Regeln gemäss Post im GUI erstellt - IGMP Snooping auf Netgear Switch gemäss verlinktem Post von @Tux0ne konfiguriert - IGMP Header Validation mittels config.properties deaktiviert und mit ssh/telnet auf USW verifiziert: (UBNT) >enable
(UBNT) #show igmpsnooping
Admin Mode..................................... Enable
Multicast Control Frame Count.................. 35
IGMP header validation......................... Disabled
Interfaces Enabled for IGMP Snooping........... None
VLANs enabled for IGMP snooping................ 1 meine config.gateway.json: {
"interfaces": {
"ethernet": {
"eth0": {
"dhcp-options": {
"client-option": [
"retry 60;",
"send vendor-class-identifier "100008,0001";"
]
}
}
}
},
"protocols": {
"igmp-proxy": {
"interface": {
"eth0": {
"alt-subnet": [ "0.0.0.0/0" ],
"role": "upstream",
"threshold": "1"
},
"eth1": {
"alt-subnet": [ "0.0.0.0/0" ],
"role": "downstream",
"threshold": "1"
}
}
}
}
} Ich habe irgendwo gelesen, dass LiveTV Multicast und Replay Unicast ist. Gibt es irgendwelche Einstellungen bzgl. Unicast, die ich überprüfen kann? Sonstige Ideen? Vielen Dank für eure Unterstützung. Gruss, Simon
Mehr anzeigen