It would be nice to have the settings published to allow setting third party managed switches to support Swisscom services (VLANs and such). Similar to the config file that is made available for the specific TP-Link switch.
Hi all
this is the summary table of the settings to apply to an Ethernet switch, to make it run with all Swisscom retail services.
1. IPTV connected to the switch over Ethernet:
2. Internet Booster (4G and 5G) connected to the switch over Ethernet:
3. WLAN-Box (1 and 2) connected to the switch over Ethernet:
That's it! Let em know if anything does not work as expected.
@bitracer Could you please add your proposals in the existing thread as suggested by @Black Mamba this is a “Customer help Customer” community and we can’t do any improvement by ourselves and if a responsible Swisscom is reading these proposals it is easier to have them bundled.
https://community.swisscom.ch/t5/Router-Hardware/Internet-Box-4-is-here/m-p/723610#M807
Sure, but this is not necessarily related to IB4.
> ... Sure, but this is not necessarily related to IB4. ...
thanks again for this new improvement suggestion, if it is not about IB4 in particular, maybe this discussion, admittedly a bit old, would have been more appropriate for the advanced improvement suggestion
WLAN Guest Network | Swisscom Community post @AntoineBD (Swisscom) 04.08.2020
Note that the Swisscom TP-Link switch is more than sufficient unless you need multi-gigabyte capacity (with the 2.5Gb/s port of the Internet-Box 3 for example). It works well and you can configure a lot of things if needed. Of course, it is pre-configured for Swisscom services like TV over the switch, guest WLAN over a WLAN-Box, Bonding for the Internet-Booster, etc. It is certainly not the newest gigabit device on the market, but you probably won't get better performance with a newer gigabit switch..... Finally, it is not very expensive.
if there is no current discussion in the topic it would be better to open a generic topic: improvement suggestions (for example) and use it permanently
as announced @Gaeilgeoir the Super User are customers and not employees of Swisscom which moreover does not announce any novelty before it is available on the market, on the other hand it takes into account the suggestions and remarks of the forum as far as possible and especially according to the evolution of the market and the competition obviously
Hi all
this is the summary table of the settings to apply to an Ethernet switch, to make it run with all Swisscom retail services.
1. IPTV connected to the switch over Ethernet:
2. Internet Booster (4G and 5G) connected to the switch over Ethernet:
3. WLAN-Box (1 and 2) connected to the switch over Ethernet:
That's it! Let em know if anything does not work as expected.
Thanks @AntoineBD, that’s what I was looking for.