abbrechen
Suchergebnisse werden angezeigt für 
Stattdessen suchen nach 
Meintest du: 
Gelöst
  • Der Fragesteller hat diesen Beitrag als gelöst markiert.
  • Geschlossen

Centro Grande firmware and multicast msg

Contributor
1 von 6

Hello, could you please tell me where to download the firmware 5.0.0.30 for Centro Grande (Pirelli) ? if possible, a site within the swisscom domain. Thank you!

Editiert
HILFREICHSTE ANTWORT

Akzeptierte Lösungen
Super User
4 von 6

Centro Grande is a triple play device. The br0 is the internal network (LAN ports WLAN AP's) Swisscom TV needs multicast to work. Multicast is like a radio signal for IP. (send to many not only to one)

If you don't have Swisscom TV you could disable it. But I wouln't. It doesn't affect you in any case.

 

Go to command line (telnet)

 

telnet 192.168.1.1

admin

your password

conf

set /dev/br0/mcast/enabled 0

reconf 1

 

Swisscom TV users can try this an see your stream stopping. Doing the same but 

set /dev/br0/mcast/enabled 1

reconf 1

 

and the stream  starts to work as usual.

 

https://www.tuxone.ch
Falls du in deinem Thread eine Antwort von Tux0ne wünschst, so ergänze deinen Text mit @Tux0ne. Damit erhalte ich eine Benachrichtigung.

Editiert
5 Kommentare
Super User
2 von 6

Usually here http://www.swisscom.ch/res/hilfe/downloads/dsl/index.htm?languageId=de&campID=src_firmware&

But it's still the older version. Reboot your Router and it should update to the new version.

 

Or get it there: http://tpirelli.blogspot.com/2010/08/firmware-images.html

https://www.tuxone.ch
Falls du in deinem Thread eine Antwort von Tux0ne wünschst, so ergänze deinen Text mit @Tux0ne. Damit erhalte ich eine Benachrichtigung.

Contributor
3 von 6

Thanks Tuxone!

 

Could you please tell me another thing:

 

I found this kind of messages about "multicast group" in the system log... what do they mean?

 

if they are useless, is there a way to make the router not execute them?

 

 

29.10.201016:55:46IGMPInformationRemoving multicast group 224.0.0.252 from device br0 port 0
29.10.201016:55:46IGMPInformationAdding multicast group 224.0.0.252 to device br0 port 0
Super User
4 von 6

Centro Grande is a triple play device. The br0 is the internal network (LAN ports WLAN AP's) Swisscom TV needs multicast to work. Multicast is like a radio signal for IP. (send to many not only to one)

If you don't have Swisscom TV you could disable it. But I wouln't. It doesn't affect you in any case.

 

Go to command line (telnet)

 

telnet 192.168.1.1

admin

your password

conf

set /dev/br0/mcast/enabled 0

reconf 1

 

Swisscom TV users can try this an see your stream stopping. Doing the same but 

set /dev/br0/mcast/enabled 1

reconf 1

 

and the stream  starts to work as usual.

 

https://www.tuxone.ch
Falls du in deinem Thread eine Antwort von Tux0ne wünschst, so ergänze deinen Text mit @Tux0ne. Damit erhalte ich eine Benachrichtigung.

Editiert
Highlighted
Novice
5 von 6

Where can I find the command line? 

Export Pro
6 von 6

@Doctorx schrieb:

Where can I find the command line? 


If you don't know that, its better to NOT configure anything that way - it's a EXPERT mode that you should only use if you really KNOW what you do.