Good morning everyone, in a few days I will finally put the 10GB network into service at my home too. I wanted to know if it was possible to bypass the Swisscom IB and connect directly with fiber to the router (in my case a UDM SE)? So as not to have problems with opening the doors on 2 devices etc… also you know if the TV works (I’ve heard several problems here too). Thanks in advance
Rabbit74 Everything you need to know about third-party routers in the Swisscom network can be found here:
Connect a non-Swisscom router to the network - Help | Swisscom
Perhaps two more important points than this:
and regarding Swisscom TV (with the TV box):
Agus fágaimíd siúd mar atá sé
Hi, thank you very much for the quick response but perhaps I should have given more detail to the question as Ubiquiti devices do not exist in the list of compliant devices but there are third-party SFP interfaces compatible with Ubiquiti which are mounted on routers which are compatible in the list. Isn’t it sufficient to install an interface / module compatible with XGS-PON to ITU standard G.9807.1?
as far as TV is concerned, the same goes: on my Ubiquiti router (as on the entire network) I activated both options but without success: I can see it for you but only if they watch it not live. Maybe I left something out about the configuration but I’m sure those 2 parameters are active on the entire network.
@Rabbit74 Since I don’t use a third party router, I can’t say if it will work with the module, you should try it, but of course I understand not wanting to spend money on something that might not work.
Maybe you should ask in the German-speaking forum, where there are people with more experience with third-party routers.
Agus fágaimíd siúd mar atá sé
Giazie.
I’ve already entered communities D and F but haven’t found anything 😀.
I also wanted to share this topic in Italian for all those who speak Italian and perhaps have difficulty with other languages: I don’t find it correct that we always have to look for all the information and share it in German or French ☺️
@Rabbit74 What can you do, this is a “customers help customers” forum, there are not many customers who write here and speak Italian and know about foreign routers. I will ask someone @bitracer, @Doremi, @Black Mamba can you help me?
Agus fágaimíd siúd mar atá sé
Unfortunately not. The best way is to buy the Nokia certified “modem” that works in bridging and then connect the UDM via network cable.
Below you will find a fairly detailed discussion on how to proceed:
[https://community.swisscom.ch/t5/Router-Hardware/How-to-configure-UniFi-Dream-Machine-Pro-for-10GBE-Swisscom/m-p/766604#M1161] (https://community.swisscom.ch/t5/Router-Hardware/How-to-configure-UniFi-Dream-Machine-Pro-for-10GBE-Swisscom/m-p/766604#M1161)
this discussion on the EN (English) Community may help
How to configure UniFi Dream Machine Pro for 10GBE… | Swisscom Community
with an engine on the net search for:
udm if swisscom community
you will find many relevant results 😀
“On apprend parfois plus d'une défaite que d'une victoire” — José Raúl Capablanca
