@Dominic1 wrote:
Small question, do your UHD channels also flicker?
Cabling is OK and the TV set is also compatible according to the UHD assistant
If the UHD assistant shows compatible ones, that doesn’t mean that the TV shows everything 100% correctly. On my Samsung I also had to install the firmware later so that everything was ok.
What kind of LAN (Ethernet cable) installation is this, a direct one from the router to the UHD TV-Box, or does it still go through some distributor?
At least it shouldn’t flicker!
Installationen, Netzwerk, Internet, Computertechnik, OS Windows, Apple und Linux.
- Solutionselected by Dominic1
My opinion is that the D-LAN (Powerline) has a problem with UHD TV here, UHD TV needs more power than HD TV.
If it is possible to test it by plugging the included white LAN cable directly into the router and the TV-Box, then try that to see if it still flickers.
Installationen, Netzwerk, Internet, Computertechnik, OS Windows, Apple und Linux.
I also have a Samsung TV and the UHD box, everything works well. The cherker is also 4 times green.
Every now and then after switching on from standby there will be a short white flash in the picture (regardless of whether UHD or HD) every 3-5 seconds. It’s as if there was an interference signal on the HDMI. After powering off/on the UHD box everything is fine again.
Don’t know what it is, it only happens every 3-5 days.
You write it correctly, SHOULD work, but you don’t necessarily have to always and everywhere.
I therefore generally recommend that all devices that have an Ethernet Anschluss (including laptops) always be connected to a cable (Cat5e or better) and that WLAN only be used for SMART phones, tablets, MyStrom, etc.