Hello, this post has been translated using google translate. I am not a german speaker but it seems that this is the best place to receive technical answers, therefore I decided to post it here to improve visibility and the chance to solve my problem. Apologies for the obvious translation issues.
Ich habe eine InternetBox3, natürlich den ISP-Router, verbunden mit meinem Glasfaserkabel-Setup mit:
-LAN-IP 192.168.3.1
-LAN-Subnetz 192.168.3.0/24.
Ich habe (mit LAN-Kabel) einen Linksys WRT3200ACM kaskadiert, mit der neuesten DD-WRT-Firmware geflasht, mit:
-WAN-IP: 192.168.3.101
-WAN-Subnetz: 192.168.3.0/24
-LAN-IP: 192.168.4.1
-LAN-Subnetz: 192.168.4.0/24
Die IP von DDWRT wird auf der InternetBox3 statisch gesetzt.
Das Internet wird ordnungsgemäß von der InternetBox3 an den DDWRT weitergeleitet, der es an seine Geräte verteilen kann.
Wenn ich mit dem DDWRT verbunden bin, kann ich erreichen
-DDWRT-Konfigurationsseite mit 192.168.4.1
-DDWRT-Konfigurationsseite mit 192.168.3.101
-InternetBox3 Konfigurationsseite, mit 192.168.3.1
Wenn ich mit der InternetBox3 verbunden bin, kann ich die DDWRT-Konfigurationsseite nicht erreichen (auch nicht alle damit verbundenen Geräte). Ping 192.168.4.1 oder ping 192.168.3.102 mit Befehlszeile zeigt keine Kommunikation. Das gleiche mit dem Browser.
Ich richte eine statische Route auf der InternetBox3-Seite wie folgt ein:
Zielnetzwerk: 192.168.4.0
Subnetzmaske: 255.255.255.0
Weiterleiten an Gerät: wrt3200acm (192.168.3.101) ---- dies wird aus der Liste ausgewählt, es kann nicht falsch sein.
Ich habe versucht, die Firewall und DHCP zu deaktivieren - nichts hat sich geändert.
Ich bezweifle stark, dass das Problem der DDWRT-Router ist, ich glaube, dass mit diesem InternetBox3-Router etwas nicht stimmt.
Gibt es vielleicht einen Hinweis, wie es weitergeht?
Danke vielmals.
-------------------------
english version:
I have an InternetBox3, of course the ISP router, connected to my fiber cable setup with:
-LAN IP 192.168.3.1
-LAN Subnet 192.168.3.0/24.
I cascade connected (with LAN cable) to it a Linksys WRT3200ACM, flashed with the latest DD-WRT firmware, with:
-WAN IP: 192.168.3.101
-WAN Subnet:192.168.3.0/24
-LAN IP: 192.168.4.1
-LAN Subnet: 192.168.4.0/24
The IP of DDWRT is set static on the InternetBox3.
Internet is passed properly from the InternetBox3 to the DDWRT, that can distribute it to the its devices.
When I am connected to the DDWRT, I can reach
-DDWRT config page, with 192.168.4.1
-DDWRT config page, with 192.168.3.101
-InternetBox3 config page, with 192.168.3.1
When I am connected to the InternetBox3, I can't reach the DDWRT config page (neither all the devices connected to it). Ping 192.168.4.1 or ping 192.168.3.102 with command line shows no communication. Same with the browser.
I setup a static route in the InternetBox3 page as below:
Destination Network: 192.168.4.0
Subnet Mask: 255.255.255.0
Forward to device: wrt3200acm (192.168.3.101) ---- this is selected from the list it can't be wrong.
I tried disabling the firewall and DHCP - nothing changed.
I strongly doubt that the problem is the DDWRT router, I believe it is something wrong with this InternetBox3 router.
Any hint on how to proceed maybe?
Many thanks.