Unless I’m mistaken, the GBICs of the Swisscom Internet Box are as follows:

TX: 1310nm / RX: 1490nm

Thank you for this information, what is annoying is this “DHCP option 60”, after a quick consultation of my UTM interface, it does not seem possible to specify this option. I guess if this setting is omitted it doesn’t work?

I just found the answer on a forum, it seems that it is possible with this manipulation:

edit /var/chroot-dhcpc/etc/ you iface file
add the following line
send vendor-class-identifier VALUE IN HEX;

example:
send vendor-class-identifier 49:50:54:56:5f:52:47;

On the other hand, is the HEX value important? Yes or do you know how to find it?

For DHCP Option 60, I found the ID to use on a pfsense Firewall, I don’t know if that helps:

send dhcp-class-identifier “100008,0001,pfSense dhclient 2.1”;

Source: [https://www.skv-net.ch/user/blog1-s-master/entry15-swisscom-glasfaser-mein-ftth-tagebuch-5-update-10-01-2014/] (https://www.skv-net.ch/user/blog1-s-master/entry15-swisscom-glasfaser-mein-ftth-tagebuch-5-update-10-01-2014/)

This hexadecimal value is necessary for the All IP product from Swisscom.

The following line should be fine

send vendor-class-identifier 31:30:30:30:30:38:2C:30:30:30:31:2C:55:54:4D;

Good morning,

I’ve also been sending messages to Swisscom for a while now to add this function to your box routers. Cablcom has this option, and I find it really unfortunate that you’re not doing anything about it.

I have a late Zyxel behind my Box and it’s just crap to do double Nat.

Anyway, I hope this comes to light.

My best regards

PS: This will also be a plus on a commercial level, more customers……….

It’s done!

In the end, it would be enough to remove the need to make a DHCP request with a specific Vendor ID… presto, VLAN10 and that’s it…

And for Swisscom, if the customer doesn’t use the provided modem, they don’t give support, that’s it.

Hello everyone, I am preparing for the ftth which will arrive at my home in a few months and I see that my concerns are also yours…

For the moment the solution I am aiming for is an SME subscription (are they going to do it to a private one) because the business router supports IP passthrough (with Voip and TV which remains on the router). Exactly what I’m looking for.

If we manage to get our hands on a large business center, could it operate on a line with a private subscription? Or, could Swisscom provide the large business center to private companies in return for something?

Gigius

Good morning,

Thank you for your response.

However, what is the current solution to resolve this problem that many people encounter?

Thank you in advance for your prompt response.

The solution would be for Swisscom to update the firmware and add the Bridge option, that’s all. It would also be good if someone from Swisscom paid attention to this subject.

Personally I have a mikrotik that nikel works, except for the Swisscom TV which I have not yet managed to configure.

Hello Soldier9945,

I really want to test your system which seems well within my budget! Can you recommend a good media converter to use with the GBIC present with the box?

behind my router is a Netgear WNDR3700 with OpenWRT for now, I hope that will be enough Happy smiley and do you know the IGMP settings to make?

Thank you for your help!

+1 for bridge mode or when they offer complete documentation in English or French which explains the main settings that should be put (specific to Swisscom) in a router like Netgear, Ubiquiti, MikroTik for Swisscom tv2 to work .

The internetbox-plus seems weak (saturated at 500 mbits) when there are a lot of port forwarding rules and there is very heterogeneous traffic. Whereas in the case with 2-3 clients who surf normally there is no problem reaching 1Gbps.
But with the simplified interface you cannot see the router’s load history.

I would also like to change to a more serious router like [a router with sfp+ and sfp](https://www.digitec.ch/fr/s1/product/mikrotik-ccr1009-8g-1s-1s-routeurs-3229876?tagIds =7) but I’m not sure that the tv will work perfectly…

With this ubiquity, I think we can recover the optical socket from the internetbox and put it in the ubiquity in the sfp port after which we will have to configure the router so that it works with swisscom and tv. And since we have 0 information it’s not going to be easy.