cool, kenne ich aber nicht.
Das Swisscom CPE selber lässt sich aber schon am Fiber Anschluss betreiben?
Hast du die VLAN ID 10 auch angegeben?
DHCP over fibre / electrical Ethernet protocol stack (CFU specific: RES, SME, CWS only) The following protocol stack for DHCP over either fibre or electrical Ethernet must be supported (DHCP) (UDP) IP 802.3 Ethernet / 802.1q (currently VLAN tag 10, configurable for future applications)
DHCP option 60 "vendor class identifier" (CFU specific: RES only) The CPE must support DHCP option 60 (vendor class identifier) according to RFC 2131. The following CPE identifiers must be sent at the beginning of the DHCP option 60 field in this order in the correct format (see below) separated by commas:
Service provider ID (6 Bytes): Default setting must be 100008
Service ID (4 Bytes): Default setting must be 0001
Provisioning code (36 Bytes): Written by Auto Configuration Server (ACS) via TR-069 according to RFC 4122 For all applications, further CPE identifiers may be sent in the DHCP option 60 field separated by commas, e.g.: Vendor name MAC address CPE model SW release CPE serial number
The format of the option 60 string as part of the DHCP request must then be:,,,,,,,, These parameters are separated by a single comma (ASCII 44), without a space.
